trungdoan29
07-24-2016, 06:18 PM
Bẫy hơi TD-10NA (http://vancongnghiep.info/), 30NA là một trong những dạng bẫy hơi (http://vancongnghiep.info/bay-hoi/) được sử dụng rộng rãi trong ngành công nghiệp hơi, nước nóng. Có thể lắp trước hoặc sau các hệ thống van công nghiệp (http://vancongnghiep.info/) được dùng để loại bỏ hơi nước, nước đảm bảo không khí ra khỏi là khô.
Đặc điểm
Bimetal solves air-binding problem and ensures a smooth discharge of cold condensate or air at the start of operation, enabling steam equipment to efficiently start to run.
The stainless steel valve disc and valve seat, which are subjected to special heat treatment, offers excellent durability.
The valve disc, valve seat and bimetal can be replaced on site without disconnecting the steam trap from the piping.
Easy maintenance and inspection due to simple structure: the valve disc is only movable part.
Compact, lightweight and inexpensive. Applicable in wide working pressure range and adjustment-free.
Installable in any direction and easy to plumb.
Free of improper operation and steam leakage due to air insulation type.
Built-in strainer eliminates requirement for strainer before the product.
Large discharge capacity.
Cấu tạo
http://vancongnghiep.info/wp-content/uploads/2016/07/cau-tao-coc-ngung-td-10na.jpg
Thông số kỹ thuật
http://vancongnghiep.info/wp-content/uploads/2016/07/thong-so-y-thuat-bay-hoi-td-10na.jpg
Kích thước và trọng lượng
http://vancongnghiep.info/wp-content/uploads/2016/07/thong-so-y-thuat-coc-ngung-td-10na.jpg
The dimensions of the product with JIS 10K FF flanged and the product with JIS 20K FF flanged are identical.
The thickness of JIS 10K FF flanges conforms to that of JIS 20K FF flanges.
Giản đồ độ giảm áp suất
http://vancongnghiep.info/wp-content/uploads/2016/07/tra-cuu-do-giam-ap-suat-stream-trap-1.jpg
The discharge capacity shown in the
chart on the left is the maximum value. In designing a system, select a steam trap with a sufficient safety factor (four to five times the regular level). That is, for example, if a discharge capacity of
100 kg/h is required, select a steam trap capable of discharging 400 to 500 kg/h.
Vị trí lắp đặt
http://vancongnghiep.info/wp-content/uploads/2016/07/vi-tri-lap-dat-bay-hoi.jpg
Công ty TNHH MTV Việt Nhật
Địa chỉ: 11/6A, Đường số 5, F. Linh Tây, Q. Thủ Đức, HCM
Tel: 0976463019 | Fax: 0837202677
Email: doantrung29@gmail.com
Skype: trung doan
Website: vancongnghiep.info
Đặc điểm
Bimetal solves air-binding problem and ensures a smooth discharge of cold condensate or air at the start of operation, enabling steam equipment to efficiently start to run.
The stainless steel valve disc and valve seat, which are subjected to special heat treatment, offers excellent durability.
The valve disc, valve seat and bimetal can be replaced on site without disconnecting the steam trap from the piping.
Easy maintenance and inspection due to simple structure: the valve disc is only movable part.
Compact, lightweight and inexpensive. Applicable in wide working pressure range and adjustment-free.
Installable in any direction and easy to plumb.
Free of improper operation and steam leakage due to air insulation type.
Built-in strainer eliminates requirement for strainer before the product.
Large discharge capacity.
Cấu tạo
http://vancongnghiep.info/wp-content/uploads/2016/07/cau-tao-coc-ngung-td-10na.jpg
Thông số kỹ thuật
http://vancongnghiep.info/wp-content/uploads/2016/07/thong-so-y-thuat-bay-hoi-td-10na.jpg
Kích thước và trọng lượng
http://vancongnghiep.info/wp-content/uploads/2016/07/thong-so-y-thuat-coc-ngung-td-10na.jpg
The dimensions of the product with JIS 10K FF flanged and the product with JIS 20K FF flanged are identical.
The thickness of JIS 10K FF flanges conforms to that of JIS 20K FF flanges.
Giản đồ độ giảm áp suất
http://vancongnghiep.info/wp-content/uploads/2016/07/tra-cuu-do-giam-ap-suat-stream-trap-1.jpg
The discharge capacity shown in the
chart on the left is the maximum value. In designing a system, select a steam trap with a sufficient safety factor (four to five times the regular level). That is, for example, if a discharge capacity of
100 kg/h is required, select a steam trap capable of discharging 400 to 500 kg/h.
Vị trí lắp đặt
http://vancongnghiep.info/wp-content/uploads/2016/07/vi-tri-lap-dat-bay-hoi.jpg
Công ty TNHH MTV Việt Nhật
Địa chỉ: 11/6A, Đường số 5, F. Linh Tây, Q. Thủ Đức, HCM
Tel: 0976463019 | Fax: 0837202677
Email: doantrung29@gmail.com
Skype: trung doan
Website: vancongnghiep.info